Aruba 360 Series outdoor Wi-Fi 5 access point

Advanced Cellular Coexistence (ACC)

• Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment

Quality of service for unified communication apps

• Supports priority handling and policy enforcement for unified communication apps, including cellular Wi-Fi calling and Microsoft Skype for Business with encrypted videoconferencing, voice, chat, and desktop sharing

Best-in-class RF management

• Integrated Adaptive Radio Management™ technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference.

Built-in Bluetooth Low-Energy (BLE) radio

• Enables proximity-based push notifications and location-based services for BLE-enabled mobile devices
• Enables management for deployment of battery-powered Aruba Beacons

Spectrum analysis

• Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference

Wireless mesh

• Wireless mesh connections are convenient where Ethernet drops are not available.

• Controller-managed AP or Remote AP (RAP) running ArubaOS™ – When managed by Aruba Mobility Controllers, 360 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
• Aruba 360 Series APs running InstantOS™ – In Aruba Instant mode, a single AP automatically distributes the network configuration with other APs in Instant mode in the WLAN.
• Air monitor
• Hybrid WLAN AP and air monitor
• Secure enterprise mesh

For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Aruba APs in Instant mode are factory shipped to any site and configure themselves when powered up.

If WLAN and network requirements change, a built-in migration path allows 360 Series APs in Instant mode to become part of a WLAN that is centrally managed by a Mobility Controller.

• 2.4-GHz (300 Mbps max)​ and 5-GHz (867 Mbps max) radios, each with 2×2 MIMO and integrated omni- directional antennas

AP-367

• 2.4-GHz (300 Mbps max)​ and 5-GHz (867 Mbps max) radios, each with 2×2 MIMO and integrated directional antennas

WIRELESS RADIO SPECIFICATIONS

2×2 MIMO with two spatial streams and up to 1,266 Mbps wireless data rate

Supported frequency bands (country-specific restrictions apply):

• 2.4000 GHz to 2.4835 GHz
• 5.150 GHz to 5.250 GHz
• 5.250 GHz to 5.350 GHz
• 5.470 GHz to 5.725 GHz
• 5.725 GHz to 5.875 GHz

Available channels: Dependent upon configured regulatory domain

Dynamic Frequency Selection (DFS) compliant to radar coexistence requirements

Supported radio technologies:

• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• 802.11n/ac: 2×2 MU-MIMO with up to two spatial streams

Supported modulation types:

• 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm

Maximum (conducted aggregate) transmit power (limited by local regulatory requirements):

• 2.4-GHz band: +26 dBm (23 dBm per chain)
• 5-GHz bands: +25 dBm (22 dBm per chain)

Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems

Maximum ratio combining (MRC) for improved receiver performance

Cyclic delay diversity (CDD) for improved downlink RF performance

Short guard interval for 20-MHz, 40-MHz and 80-MHz channels

Space-time block coding (STBC) for increased range and improved reception

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

Transmit beam-forming (TxBF) for increased reliability in signal delivery

802.11ac wave 2 MU-MIMO

Supported data rates (Mbps):

• 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n: 6.5 to 300 (MCS0 to MCS15)
• 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)

802.11n high-throughput (HT) support: HT 20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80

802.11n/ac packet aggregation: A-MPDU, A-MSDU Power

Maximum power consumption: 12.5 watts

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source

• AP-365: Integrated Omni antennas (H and V polarized)
  • 2.7 dBi @ 2.4 GHz
  • 4.3 dBi @ 5.x GHz
• AP-367: Integrated Directional antennas (+/-45 polarized)
  • 6.3 dBi @ 2.4 GHz (90° Vertical x 90° Horizontal)
  • 6.5 dBi @ 5.x GHz (90° Vertical x 100° Horizontal)

OTHER INTERFACES

• Auto-sensing link speed and MDI/MDX
• 802.3az Energy Efficient Ethernet (EEE)
• PoE-PD: 802.3af PoE

Serial console interface (micro USB)

Reset button

Visual indicator (LED):

• Power/system status

Optional mounting kits:

• AP-270-MNT-V1: Outdoor AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner.
• AP-270-MNT-V2: Outdoor AP short mount kit for pole/wall mounting
• AP-270-MNT-H1: Outdoor AP mount kit for hanging from inclined/horizontal structures
• AP-270-MNT-H2: Outdoor AP flush mount kit for hanging from inclined/horizontal structures
• AP-270-MNT-H3: Outdoor dual-articulating mount kit for wall or pole mounting

• 165mm (W) x 165mm (D) x 110mm (H), 6.5″ (W) x 6.5″ (D) 4.3″ (H)
• 807g/1.78lbs (AP-365)                    815g/1.80lbs (AP-367)

Dimensions/weight (shipping):

• 198mm (W) x 200mm (D) x 128mm (H), 7.8″ (W) x 7.9″ (D) x 5.0″ (H)
• 1,115g/2.46lbs (AP-365)            1,123g/2.48lbs (AP-367)

• Temperature: -40° C to +55° C (-40° F to +131°F) ambient in full sun
• Humidity: 5% to 95% non-condensing

Storage and transportation:

• Temperature: -40° C to +70° C (-40° F to +158°F)
• EN 300 019 Storage and Transportation

Shock, vibration, and earthquake

• IEC 60068-2-64/-27/-6

Weather resistance

• IP66/67
• ASTM B117-07A: Salt spray testing per UL50 NEMA 4x
• EN 300 019 Environmental testing
  • Non-weather protected locations
  • Full solar exposure

CE Marked

R&TTE Directive 1995/5/EC

Low Voltage Directive 72/23/EEC

EN 300 328

EN 301 489

EN 301 893

UL/IEC/EN 60950

EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

AP-367: APEX0367

Wi-Fi CERTIFIED™ a,b,g,n

Wi-Fi CERTIFIED™ ac (with wave 2 features)