Aruba 387 Series outdoor 60Ghz/5Ghz point-to-point access point

WIRELESS RADIO SPECIFICATIONS

• Temperature-hardened, dual radio, 60GHz 11ad and 5GHz 802.11ac 2×2 MIMO

60 GHz 802.11ad 1×1 (2502.5 Mbps max rate) radio

• 1 Spatial Stream for up to 2.5 Gbps
• Internal scanning antenna
  • +/- 45° Azimuth Scan
  • +/- 17° Vertical Scan

5GHz 802.11ac 2×2 MU-MIMO (867 Mbps max rate)

• Two spatial stream MIMO for up to 867 Mbps wireless data
• Internal directional antenna 9 dBi

Software-configurable dual radio supports 5 GHz (Radio 0) and 60GHz (Radio 1)

Supported frequency bands (country-specific restrictions apply):

• 2.400 to 2.4835 GHz (BLE)
• 5.150 to 5.250 GHz
• 5.250 to 5.350 GHz
• 5.470 to 5.725 GHz
• 5.725 to 5.850 GHz
• 5.825 to 5.875 GHz
• 57 to 64 GHz

Available channels: Dependent on configured regulatory domain

Dynamic frequency selection (DFS) maximizes the use of available 5GHz RF spectrum.

Supported radio technologies:

• 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• 802.11ad: Single carrier (SC)

Supported modulation types:

• 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• 802.11ad: BPSK, QPSK

Transmit power: Configurable in increments of 0.5 dBm for 5 GHz

Maximum EIRP (limited by local regulatory requirements):

• 60GHz band: 40 dBm EIRP max
• 5GHz band:  387: 34 dBm EIRP

Maximum ratio combining (MRC) for improved receiver performance on 5 GHz

Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

Short guard interval for 20MHz, 40MHz, 80MHz on 5GHz

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

802.11ac Transmit beam-forming (TxBF) for increased signal reliability and range

802.11ad Beam Steering

Supported 11a/ac data rates (Mbps):

• 802.11a 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS15)
• 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)

802.11n high-throughput (HT) support: HT 20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80/160

802.11ad

802.11n/ac packet aggregation: A-MPDU, A-MSDU

OTHER INTERFACES

• Auto-sensing link speed and MDI/MDX
• 802.3az Energy Efficient Ethernet (EEE)

Bluetooth Low Energy (BLE) radio

• Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity

Visual indicator (multi-color LED): For system and radio status

Reset button: Factory reset (during device power up)

Micro USB console interface

Idle power consumption: 4.5W

Power sources sold separately

Power over Ethernet (PoE+): 802.3at-compliant

Power over Ethernet (PoE): 802.3af with some operational restriction:

• Max conducted power per chain for 5GHz drops to 19 dBm

AP-270-MNT-V2

AP-270-MNT-H1*

AP-270-MNT-H2*

* Recommended bracket solutions for most apps.

• 18 cm (W) x 18 cm (D) x 10.1 cm (H)

Weight (excluding mount adapter):

• 1.198 kg

• Temperature: -40°C to +60°C (-40°F to +140°F)
• Humidity: 5% to 95% non-condensing

Storage and transportation:

• Temperature: -40°C to +70°C (-40°F to +158°F)

Operating altitude: 3,000 m

Water and dust

• IP66/67

Salt tolerance

• Tested to ASTM B117-07A salt spray 200 hrs

Wind survival: up to 165 mph

Shock and vibration ETSI 300-19-2-4

CE Marked

RED Directive 2014/53/EU

EMC Directive 2014/30/EU

Low Voltage Directive 2014/35/EU

UL/IEC/EN 60950

EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

UL2043 plenum rating

Wi-Fi Alliance certified 802.11a/b/g/n/ac