Specifications | |
UNIQUE BENEFITS | Dual Radio 802.11ac access point with Multi-User MIMO
Built-in Bluetooth Low-Energy (BLE) radio
Advanced Cellular Coexistence (ACC)
Industrial design for harsh, weather-protected environments
Connectorized antenna ports support high gain large public venue antennas Designed for enhanced physical security Quality of service for unified communication apps
Best-in-class RF management
Spectrum analysis
Wireless mesh
Intelligent app visibility and control
Aruba Secure Core
|
CHOOSE YOUR OPERATING MODE | As a unified AP, the Aruba 318 can be deployed with or without a controller and can be readily switched to accommodate changing network needs.
Other functional modes include:
For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Unified APs are factory-shipped to any site and configure themselves when powered up. |
SPECIFICATIONS | 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
|
WIRELESS RADIO SPECIFICATIONS |
AP type: Indoor hardened, dual radio, 5 GHz 802.11ac 4×4 MIMO and 2.4 GHz 802.11n 2×2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1) 5 GHz:
2.4 GHz:
Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio Supported frequency bands (country-specific restrictions apply):
Available channels: Dependent on configured regulatory domain. Dynamic frequency selection (DFS) maximizes the use of available RF spectrum. Supported radio technologies:
Supported modulation types:
Transmit power: Configurable in increments of 0.5 dBm Maximum (conducted) transmit power (limited by local regulatory requirements):
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks. Maximum ratio combining (MRC) for improved receiver performance Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased signal reliability and range Supported data rates (Mbps):
802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80/160 802.11n/ac packet aggregation: A-MPDU, A-MSDU |
POWER | Worst-case power consumption from the AP: 23W
Power sources sold separately Power over Ethernet (PoE+): 802.3at-compliant |
WI-FI ANTENNAS PORT
|
5 GHz
2.4 GHz
|
OTHER INTERFACES
|
One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
One 1000BASE-X SFP Port Bluetooth Low Energy (BLE) radio
Visual indicator (multi-color LED): For system and radio status Reset button: Factory reset (during device power up) Micro USB console interface Kensington security slot |
MOUNTING | Optional mounting kits:
|
MECHANICAL | Dimensions/weight (unit, excluding mount accessories):
|
ENVIRONMENTAL | Operating Temperature:
Storage and transportation:
Operating Altitude: 3,000 m Water and Dust
|
REGULATORY | FCC/ISED
CE Marked RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and approvals, please see your Aruba representative. |
REGULATORY MODEL NUMBERS | APIN0318 |
CERTIFICATIONS | CB Scheme Safety, cTUVus
UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n Wi-Fi CERTIFIED™ ac (with Wave 2 features) |
WARRANTY | Aruba limited lifetime warranty |
MINIMUM SOFTWARE VERSIONS | ArubaOS & Aruba InstantOS 8.3.0.0 |
Reviews
There are no reviews yet.